Mitsubishi Lancer Evolution 2015 Modified
The Evo has often been touted as the best car that provides a good platform for modifications. As one of the popular sports cars from the '90s, the Mitsubishi Evo presents everything one could want in a performance car. They are fast, agile, and boast relative reliability.
The Evo is also part of a JDM car culture which has created a significant customer base. It is easily modifiable depending on the desire, whether it is improved power, handling, or traction control. These alterations depend on the era of the model. Earlier Evos may accommodate rudimentary changes to their setup though the more advanced models could accept more complicated structures. The following modifications are the best options for most eras, promising more power, better rides, and great aesthetics.
10 Evolution ECU Tune
The tunes for an Evo can be installed in different ways. Expert local tuners will set the tune according to the customer's intentions for power or fuel economy. That allows one to optimize the engine modifications through the recalibration of the ECU, so there are minor adjustments to boost.
It is affordable and will often prevent further issues in the future. Customers can alternatively purchase access ports that come with preloaded performance tunes. They are also required to prevent damage from boosting above stock levels.
9 High-Flow Catalytic Converter
High-flow catalytic converters are meant for high-performance engines, so they are a good match for Evo's 4G63. It allows the exhaust gases to flow through at a higher rate, thereby lessening the restriction. A high flow unit utilizes a honeycomb set up to filter the exhaust gases.
The high flow catalytic has an extensive cross-section of the honeycomb, so more gasses can flow through it to quicken the reaction. The result is an addition of horsepower because it frees the exhaust flow.
8 Garrett Turbocharger
Depending on the Evo's model year, a turbocharger can significantly improve the horsepower output. Forced induction can increase the numbers by %50 percent or even more. Garrett turbos have a reputation for being high-end and providing sustainable power, so they would be the most advisable to purchase.
Turbochargers are usually the first addition that tuners think about, and the Garrett offering for the Evo is one of the best alternatives.
7 Upgraded Fuel Pump
Performance fuel pumps, as they are sometimes referred to, can get more fuel to the engine while also maintaining the same pressure considering it's determined by the fuel regulator. The result is great and consistent bursts of power.
These are intended for aftermarket or great applications where the cars need a higher fuel pressure than stock. The best way to ascertain the best fuel pump option for the Lancer Evolution is to find the specifications for the stock unit and compare it to those of the aftermarket Evo. The modified option can flow more or offer higher levels of fuel pressure.
6 Cold Air Intake
The cold air intake is a good addition for beginners and complementary to the turbocharger because it increases the airflow to the engine. These are designed with an increased surface area, pulling the surrounding air and decreasing its temperatures.
Cold air is denser than warm air, meaning it has higher oxygen levels, which is suitable for combustion. The size of the air intake to purchase can vary depending on the availability of space in the engine bay.
5 Stiffer Anti-Roll Bars
Anti-roll bars are good for additional stability when cornering as the springs act separately during braking and acceleration. By making the anti-roll bars stiffer, the whole setting has reduced tilt when cornering. The advantage of this is that the Evo will be more level during turns and have more agile handling.
The anti-roll bars function to counter the level forces the passengers experience during maneuvers. These are great modifications for those enthusiasts who prefer track racing and rally as opposed to drag strips.
4 Rays And Enkei Wheels
Rays and Enkei rims are some of the most respected wheel makers in Japan. Rims happen to be more of an aesthetic than functional modification, but these look great without being too flashy and are in line with the typical Japanese Domestic Market design language.
On a side note, though, it is possible to get impact preventive rims that are flush with the face of the wheel. That prevents the rim from being harmed by folding the outer rim over against a spoke.
3 Carbon Fiber Bonnet
Another aesthetic addition to the vehicle, there is some logic to using a carbon fiber bonnet. Carbon fiber hoods also come available unpainted, which means there is free reign to customize it as necessary.
The fact that carbon fiber doesn't corrode like steel is an additional plus because it ages gracefully over the car's lifespan. Carbon fiber will also reduce the car's overall weight, which is a great thing if the Evo is meant for sprints. Lower power to weight ratio is the answer in this case.
2 Upgraded Camshafts
Performance camshafts are set in such a way as to utilize more of the engine's potential. That way, the engine can experience a higher lift on the lobe, which means more air enters through the inlet valves and increases the engine's power potential.
The other benefit to be had is altered valve timing, which modifies when the valve opens and closes, and there is a definite effect on the compression ratio. These are great modifications for racing engines because they result in high idling rates. Keep in mind that this mod is not great for a daily driver Evo, as daily traffic can be quite taxing if the car uses a performance camshaft.
1 Boost Controller
The task of the boost controller is to control the level of manifold pressure by altering the pressures which go through the wastegate. The power created by the turbocharged setup is linked to the amount of air that goes to the cylinders.
As such, increasing the boost pressure via the controller is one of the effective means of raising the airflow to the cylinders and leading to higher power output. Boost controllers are also one of the best ways of controlling the level of pressure within the engine, so they are a great way to prevent detonation and expensive rebuilds.
This Is The Coolest Feature Of The Mitsubishi Lancer Evo X
We took a look at the Evo X version of the Mitsubishi Lancer to determine the best features, what makes it a neat ride.
Read Next
About The Author 
Nicholas Muhoro (26 Articles Published)
Nicholas is an automotive and tech enthusiast with an avid interest in creating thought-provoking content that engages the audience by telling relevant, captivating and interesting stories. I believe strongly in the power of digital media and its impact on the way people communicate.
More From Nicholas Muhoro
Mitsubishi Lancer Evolution 2015 Modified
Source: https://www.hotcars.com/best-coolest-mods-for-your-mitsubishi-lancer-evo/
0 Komentar